Its main function is to filter the impurities in the hydraulic oil to ensure the normal operation of the hydraulic system.

The use of hydraulic oil filter points

The hydraulic oil filter is an important part of the hydraulic system. Its main function is to filter the impurities in the hydraulic oil to ensure the normal operation of the hydraulic system. During use, in order to ensure its effectiveness and extend its service life, the following points need to be paid attention:

1. choose the right filter

According to different hydraulic system requirements, choose suitable hydraulic oil filter. Ensure the compatibility and matching of the filter and the system to avoid system performance degradation or damage due to improper selection.

2. Installation Precautions

1. Before installation, check the integrity of the filter and connecting parts to ensure that there is no damage.
2. When installing, tighten the connecting nut according to the specified torque to prevent oil leakage caused by poor sealing.
3. After installation, ensure that there is no leakage at the connection between the filter and the hydraulic system.

3. regular replacement of the filter element

The filter element is the core part of the hydraulic oil filter, and regular replacement of the filter element is the key to maintaining filter performance. According to the working environment and frequency of use of the system, check and replace the filter element regularly to ensure the cleanliness of the system.

4. maintain a clean working environment

The working environment of the hydraulic oil filter should be kept clean to prevent dust, impurities, etc. from entering the filter. When replacing the filter element or performing maintenance, ensure that the working environment is clean, and use clean tools and hydraulic oil.

5. regular inspection and maintenance

Regularly check the working status of the hydraulic oil filter, including checking the cleanliness and integrity of the filter element, and checking the wear of the seal. If any abnormality is found, it should be handled or replaced in time.

6. rational use of hydraulic system

Reasonable use of the hydraulic system to avoid long-term overload operation to reduce the pollution of the hydraulic oil and the burden of the filter. At the same time, pay attention to the control of the oil temperature, to avoid the oil temperature is too high to cause the filter performance decline.

7. Storage and Transportation Considerations

During storage and transportation, ensure that the packaging of the hydraulic oil filter is intact to avoid moisture and collision. The unsealed filter should be used in time, and the unused filter should be stored in a dry and ventilated place.

Following the above points can ensure the effective use of the hydraulic oil filter, extend its service life, and ensure the normal operation of the hydraulic system.